Poolgaurd Inground Pool Alarm
[PGRM-2]

The POOLGUARD POOL ALARM has been on the market since 1982 and is made in the USA. POOLGUARD is completely portable and comes with an in house remote receiver. The POOL ALARM features are listed below:

ò The POOLGUARD MODEL PGRM-2 introduces "Negative Displacement Technology", a new sensing method that requires no adjustment.

ò The POOL ALARM is activated with an on/off key, remove the key to turn the alarm on. Once POOLGUARD is activated the alarm will sound if the unit is removed from the pool.

ò The POOL ALARM is activated with an on/off key, remove the key to turn the alarm on. Once Poolguard is activated the alarm will sound if the unit is removed from the pool ù this feature lets the pool owner know if someone is removing the alarm without their permission.

ò The alarm will sound at the pool and in the home via a remote receiver at the same time.

ò The POOL ALARM automatically resets after 5 minutes of alarming.

ò The POOLGUARD SYSTEM can be used in a pool up to 800 square feet in area.

ò The POOL ALARM has a complete functional test feature every time it is installed in the pool.

ò The REMOTE RECEIVER comes with a 9-volt power supply and can be plugged into any 110-volt outlet in the house. The POOL ALARM sets stationary on the side of the pool deck and must be removed while swimming.

ò The range of the REMOTE RECEIVER is up to 200 feet from the POOL ALARM.

ò The POOL ALARM requires NO ropes, wires, tie downs or deck anchors. The POOL ALARM is user friendly and completely portable.

ò The POOL ALARM can be used with a solar blanket.

ò POOLGUARD maintains a full customer service department for the customer's convenience: Call 1-800-242-7163.

ò The POOL ALARM uses one 9-volt battery, and has an audible low battery indicator; battery life is approximately one year.

ò POOLGUARD has a three-year warranty and repair.